HMT VersaDrive Spiral Flute ImpactaTap 1/4" - 20 UNC

VersaDrive® Spiral Flute Taps are designed for tapping deep & blind holes and can be used with the VersaDrive® Clutched collet or adapted for use in a reversible Magnet Drill, impact wrench or even used with any standard Hand Tap wrench.
VersaDrive® ImpactaTaps are the first and only range of taps that are suitable to be driven by impact wrenches and impact drivers, providing at least 15x faster performance than tapping by hand.
With a specially designed twin-lead, cutting geometry - the dual hardening process with Titanium coating provides a fantastic solution for tapping holes in steel.

Ground Flutes create the perfect tapped hole
Safer tapping with minimal kickback
Specially hardened for impact wrench use
High grade tool steel for high accuracy & long life
Goldmax low friction titanium coating to stop burn out
High strength, non slip shank design
Wide range of sizes

Tapping Hole Size required: #7 (5.1mm)
Total Length 2-3/8"
For fastest performance use on impact wrenches & impact drivers
Check the minimum torque requirement
Laser cut holes & Stainless Steel require higher torque
Use appropriate lubrication and correct RPM to achieve long tool life